Novel rubidium polyfluorides with F_3, F_4, and F_5 species

Pressure has an important effect on chemical bonds and their chemical properties. The atypical compounds NaCl_3 and CsF_3 are predicted to be stable at high pressure and show unique physical and chemical properties. By using ab initio random structure searching and density functional theory calculations, we predicted multiple thermodynamically stable atypical compounds, which are RbF_2, RbF_3, RbF_4, and RbF_5 in the pressure range of 0–300 GPa. In these stable compounds, homonuclear bondings of F_3, F_4, and F_5 species are easily formed. The electron structure calculation showed that except for Fd-3 m phase of RbF_2, these stable compounds are insulators and F 5 p orbitals play an important role in the Fermi level. It is interesting that the compounds RbF_5 could be stable at nearly ambient pressure and 0 K which will stimulate experimental studies in the future.     

添加CaSO4·2H2O为晶种制备磷石膏半水硫酸钙晶须

以固体废弃物磷石膏为原料,在传统常压醇水热法的基础上添加CaSO₄·2H₂O为晶种制备半水硫酸钙晶须。采用单因素试验法探究了晶种含量、丙三醇含量和磷石膏质量分数对晶须结构和形貌的影响,确定晶须的最佳制备工艺条件。采用SEM和XRD对样品进行表征分析,实验结果表明:添加CaSO₄·2H₂O晶种制备晶须的长径比(49.29)比只添加丙三醇的样品的长径比(30.99)提高了近60%;当丙三醇与水的体积比(V)为1、晶种含量为1%、磷石膏质量分数为5%时制备的晶须的平均直径为0.65 μm,长径比达到了62.15,晶须的尺寸均匀。这说明添加1%CaSO₄·2H₂O晶种、V为1的丙三醇和质量分数为5%的磷石膏在常压下能制备出高长径比和尺寸均匀的半水硫酸钙晶须。     

Y3+/Li+和Y3+/Na+双掺杂氟化钡快响应闪烁晶体

氟化钡(BaF₂)晶体是已知响应最快的闪烁晶体,在高能物理、核物理及核医学等领域有着广泛的应用前景。抑制BaF₂晶体的慢发光成分对其工程应用至关重要。本文利用坩埚下降法制备了高Y³⁺掺杂浓度5%、8%、10%(摩尔分数)的BaF₂晶体,并采用Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂的方法形成电荷补偿阻止间隙F^-的产生,制备了双掺杂型BaF₂快响应闪烁晶体,进而基于优化的5 ns和2 500 ns时间门宽测试方法,研究了Y³⁺掺杂浓度以及Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂浓度对BaF₂闪烁晶体快/慢成分比的影响规律。结果表明,生长的高浓度Y³⁺掺杂BaF₂晶体的光学质量优异,在220 nm和300 nm处透过率分别高于90%和92%;随着Y³⁺掺杂浓度由0提高至10%,BaF₂晶体的慢发光成分显著降低,快/慢成分比由0.15提高至1.21;生长的Y³⁺/Li⁺及Y³⁺/Na⁺共掺杂BaF₂晶体的慢发光成分较Y³⁺掺杂BaF₂晶体进一步降低,快/慢成分比最高分别可达1.63和1.61。研制的双掺杂BaF₂快响应闪烁晶体有望应用于高能物理、核物理前沿实验等重要领域。     

Ce∶LuAG闪烁晶体的生长研究

Ce∶LuAG晶体是一种性能优良的闪烁材料,但采用提拉法生长Ce∶LuAG时,经常出现开裂和包裹物缺陷。本文通过理论与实践相结合的方式分析了温度梯度、提拉速度、晶体旋转速度和热应变等因素对晶体产生缺陷的影响,并提出了解决办法,给出了适合生长优质Ce∶LuAG晶体的工艺参数:熔体上方温度梯度在5 ℃/mm左右,放肩角度在30°~60°,提拉速度1.0~1.5 mm/h,晶体旋转速度15~25 r/min。最后成功生长出直径30 mm、等径长50 mm质量较为完好的Ce∶LuAG单晶,晶体内核心面积小。     

多振子声子晶体的低频特性研究

本文设计了一种由硅橡胶包覆层包裹4个钨振子的新型声子晶体结构,通过有限元法计算该结构的色散曲线、振动模态和传输损失谱。结果表明,该结构的带隙范围为18.85~225.28 Hz,与传输损失谱频率衰减范围相吻合,能够有效抑制20~200 Hz的弹性波在声子晶体中传播。通过分析色散曲线上点的振动模态,说明带隙产生的原因。本文讨论了声子晶体板的缺口角度和振子之间的纵向和横向间距对带隙的影响,结果表明:当缺口角度减小时,带隙下边界几乎保持不变,带隙上边界升高从而增加了带隙的宽度;振子之间横向或纵向间距增大时,带隙下边界和上边界均上升,带隙变宽,进而优化了声子晶体模型的带隙。同时声子晶体板的缺口设计能够节省材料,从而减轻结构的质量。     

田字形地震超材料甚低频宽带隙机理

在地球中传播的地震波主要有体波和表面波,而表面波中Rayleigh波对建筑物造成的破坏最为强烈。针对Rayleigh波的振动控制,提出一种田字形超材料结构。相比于传统的地震超材料,这种超材料屏障是由外部口字形框体内部嵌套十字形柱体组成,形成4个可填充区域,其外部框体采用部分埋入的方式,具有高强度、强稳定性、填充方式灵活的特点。应用有限元法计算了田字形超材料的能带结构和传输特性,并通过分析带隙边界处模态振型可知,带隙的打开是由于柱体的局域共振。结合带隙机理可知,柱体结构中土壤填充量不同可改变柱体的质量,形成不同的谐振频率,产生甚低频带隙。为进一步拓宽带隙,设计研究了正、负梯度的质量填充方式,均可得到3.3~13.1 Hz甚低频宽带隙,在谐振频率范围内两者的隔震方式分别为Rayleigh波彩虹捕获和Rayleigh波到体波的转化。最后,采用EI-Centro地震波对填充屏障进行了时程验证,加速度最大幅值衰减超过80%,为地震超材料在减震隔震方面应用提供了新的设计思路和方法。     

Kinetic model for Ostwald's rule of stages with applications to Boc-diphenylalanine self-assembly

A kinetic model which describes Ostwald's rule of stages, during the process of crystal growth from solution, is reported here. Reaction equations for stages are given where the stages convert from one to another. The final stage reacts to release a portion of solute back into solution, while the remainder converts to the final equilibrium form. Additionally, a remnant of the solute that was not consumed by any of the transitional stages, ultimately is converted into the final product. This particular model was motivated by a recent report for Boc-diphenylalanine self-assembly where the dissolved peptide was observed to go through two polymorphic stages before reaching the equilibrium supramolecular assembly [A. Levin et al., Nat. Commun. 5, 5219, (2014)]. Kinetic data for the concentration of solute present during the process are listed in the above-mentioned report. We show here how the model, for , describes the time-dependent behavior of the solute decay during the growth process. After comparing the model to the experimental data, we are able to report values for all of the rate constants and propose a rule whereby the relative magnitudes of these constants can be used to predict whether a supersaturated substance will noticeably pass through transitional stages or simply convert from solute to the equilibrium solid form.     

Copper(II) perchlorate complexes with antipyrine: synthesis,structure, cytotoxicity and DFT calculations

The synthesis, structure and properties of copper(II) perchlorate complexes with antipyrine (AP), [Cu(AP)₄(H₂O)](ClO₄)₂ and [Cu(AP)₅](ClO₄)₂, are described and compared with those of alternative compounds containing different AP ligands.     

Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

A facile route to germanium(IV) binaphthoxide complexes: crystal structure of a chiral resolved germanium(IV) binaphthoxide

A method for the facile synthesis of chiral germanium(IV) binaphthoxide complexes from the corresponding binaphthols and an organogermanium trichloride has been developed, which allows these unusual types of compounds to be synthesized in high yields. The crystal structure of one such complex, (S)-[Ge{O2C20H10(SiMe3)2-3,3'}{Cl}{Ph}], has been determined.